Pages

Friday 21 September 2012

How to flash NOKIA PHONE using pheonix and navifirm


In this post I will describe the use of latest version of Phoenix to flash the phone (working or dead) with a custom (hacked) firmware (or the original firmware if required). This flashing is usually done in “Dead Phone USB” mode (because in this mode the phone remains switched off and get flashed peacefully (less probability of errors). Also this method works in all situations – normal flashing, dead/bricked phone or custom firmware flashing. Anyway, carefully read rest of the post.
You need to have following before continuing with the process –

a. Phoenix latest version (Download and install from here or from 4shared.com or search Google for “Phoenix 2012 download”) – only for Windows
b. Navifirm (Download from here)
c. Original Firmware files (downloaded via Navifirm)
d. OPTIONAL – In case you want to flash the phone with a Custom/hacked/leaked firmware then you will also need Custom Firmware files (usually .uda, core and/or rofs files) – you should know where to get these (or search Google). Read this post to know where to get Symbian Belle (leaked) firmware files for Nokia N8.
Now before proceeding with the actual flashing process, make sure -
A. Backup your important phone content (Contacts, media files etc) via PC Suite/Nokia Ovi Suite. Preferably format your memory card and mass storage memory before flashing the phone (or if you don’t want to format the memory then at least delete everything in E:/sys, E:/private, E:/resource, F:/sys, F:/resource and F:/private folders by connecting the phone to PC in “Mass storage mode”).
B. Download your phone’s original FW files via Navifirm (if you don’t know how to use Navifirm then read this post). Better do not download thexyz.emmc.fpsx file (Memory card content) which is very large in size (around 1GB for N8) and thus will take too much time to download.
C. You can also modify and create your own hacked custom firmware using Nokia Cooker (to safely hack the phone) – refer to this post
D. If you want to flash N8 with Symbian Belle (any leaked firmware) then make sure that you have updated to Symbian Anna first (i.e. you need to have Anna installed rather than any older firmware).
E. ALSO REMEMBER that – DO NOT CONNECT THE PHONE with PC at this stage and until the last step of this process when Phoenix will ask to connect it (Even then connect the phone in “Switched Off” condition)
All set up! Now follow the instructions and screenshots given below –
1. Launch Phoenix and go to “Tools/Data Package Download”
Phoenix_flashing_tutorial
Create a folder named RM-xxx (replace “xxx” with the actual product code of your phone – for example it will be RM-596 for Nokia N8) in the last folder of the location noted in the above screenshot. (Plus also create RM-xxx in “C:/Program Files/Nokia/Phoenix/Products” in case the location in the screenshot is different from it). Now place (copy/paste) all the downloaded ORIGINAL firmware files (and not the hacked or custom ones) into the “RM-xxx” folder that you have just created in both the locations above.
2. Go to File/Open Product in Phoenix
Phoenix_flashing_tutorial
Phoenix_flashing_tutorial
Phoenix_flashing_tutorial
Note however that if you want to flash the phone with original firmware files (and not the hacked ones) then do not click on “Options” (as shown in the above screenshot), instead check/tick the “Dead phone USB flashing” option and then click on “Refurbish” tab and directly go to the last screenshot below….
Otherwise if you are flashing with a hacked/custom firmware then follow the above and rest of the screenshots given below…
Phoenix_flashing_tutorial
Phoenix_flashing2011
Note however that if you are flashing the phone with the hacked uda.fpsx file only (usually created for phone hacking – as described in this post), then just swap the uda file (and not the rofs and others as described in the above screenshot, thus only uda file entry will turn bold). Now proceed to the next step.
Phoenix_flashing_tutorial7
Phoenix_flashing_tutorial8
Phoenix_flashing_tutorial9
Switch Off the phone completely and wait for the “phone connect” prompt to appear (When Phoenix asks to connect the phone with PC). When it appears click OK and connect the switched off phone to PC using data cable. Flashing will start, wait for the process to complete (do not touch the phone or data cable during the process). After the process completes, phone will reboot, now disconnect it from PC and enjoy.
Troubleshooting -
How to avoid “Nokia dongle” error? – Make sure to disable Antivirus(es) software running in your PC before launching Phoenix, to rectify Nokia Dongle error on Phoenix start-up.
Do not panic if something goes wrong, try following
1. Format the phone with *#7370# code and see if this solves the issue
2. Hard reset the phone by key combinations and see if this solves the issue otherwise
3. Flash the phone again with original firmware files (that you downloaded with Navifirm) by following the above method and everything should be OK
Still, for any problem, comments are welcome….

3 comments: